Tablet or punching machines
Mechanical elements in these applications suffer premature wear due to high dust contamination, difficult to control.
Interoil FGL GC 50
NSF 3H registered oil, for direct contact with the product. Designed to reduce the wear of the punches and with additives that prevent the adherence of dust to the mechanisms.
Gearboxes
High load mechanical elements working under temperature conditions of 160°C and a wide range of operating speeds.
Interoil FGL 220
NSF H1 registered oil designed to protect the gearboxes from the wear caused by high loads and to extend their useful life, compatible with seals and elastomers.
Bearings and guides
Bearings operating at speeds around 400 rpm, high loads and dust contamination present in the process.
Aliplex SC
NSF H1 registered synthetic grease family, with high load resistance and designed to extend the relubrication period, controlling friction and avoiding mechanism wear.
Sealer Bearings
Mechanisms subjected to medium and high speeds with the presence of steam, water and chemicals.
Aliplex CA 102
NSF H1 registered grease designed for the lubrication of medium and high speed mechanisms, with great resistance to humidity, water washing and chemical environments.
Knurling or closing head
Mechanisms that work under conditions of humidity, presence of chemicals and speeds medium and high.
Interoil FGL 32
NSF H1 registered oil, helps to control the friction between the mechanisms during the closing of cans, extending the useful life of the mechanical elements.
Filling valve
These mechanisms operate under chemical environments that can damage valve seals.
Aliplex Seal
Inert lubricating grease, NSF H1 registered. Designed to withstand different chemicals, including Stearic Acid, Brine, Carbonic Gas, Refreshment Syrups and Alcoholic Beverages.
Stuffing or can forming
Mechanical elements that work under extreme load and pressure.
Stamp Fluid
NSF P1 registered lubricant oil, formulated with additives that protect the tooling from the friction generated, extending its useful life and reducing defects in the final product.
Cutting of cover and ring.
Operating conditions with extreme load and pressure, where it is essential to eliminate shrinkage by cutting marks or traces.
Interoil AL
NSF H1 registered lubricating oil, designed to reduce tooling wear to a minimum without leaving residues. Helps make bending and cutting processes more efficient.
Bakery moulds and trays
The adherence of residues in the moulds during the baking process, causes important losses of productivity and high decrease in the production.
Bakery Release
NSF 3H registered non-stick for bakery moulds. Designed to avoid the adherence and generation of residues to the mold, extending its useful life and increasing productivity.
Confectionery moulds
Operating conditions that generate residues adhering to the surface of the molds, causing premature wear.
Candy Release
NSF 3H registered non-stick for confectionery moulds. Designed to avoid the adherence and generation of residues to the mold, extending its useful life and increasing productivity.
Slides and guides
Mechanisms that work at high temperatures, which can cause lubricant runoff during the process.
Cad P spray
NSF H1 registered synthetic oil, designed to protect the mechanisms from corrosion, has excellent thermal stability and high adhesion that prevents the lubricant from running off.
Filling valve
These mechanisms operate under chemical environments that can damage valve seals.
Aliplex Seal
Inert lubricating grease, NSF H1 registered. Designed to withstand different chemicals, including Stearic Acid, Brine, Carbonic Gas, Refreshment Syrups and Alcoholic Beverages.
Thermocouples
Elements that require measurement stability as well as correct thermocouple insulation.
Intervalvula 2 Sil TF
NSF H1 registered sealing effect grease, its formula allows it to generate a dielectric insulating system for other mechanisms.
Gearboxes in homogenizers
Equipment subjected to high pressures and high loads, as well as contamination of the gearbox by moisture.
Gear Synt FGL
NSF H1 registered synthetic oil family, with outstanding ability to separate water and oil, large load-bearing capacity and long-life properties.
Bearings
Mechanisms that work under conditions of humidity, presence of chemicals, washing by water and steam.
Aliplex CA 102
NSF H1 registered grease designed for the lubrication of medium and high speed mechanisms, with great resistance to humidity, water washing and chemical environments.
Gearboxes
High load elements designed to withstand temperatures of 160°C and a wide range of operating speeds.
Interoil FGL 220
NSF H1 registered oil designed to protect the gearboxes from the wear caused by high loads and to extend their useful life, compatible with seals and elastomers.
Centrifugal Bearings
Mechanisms that work under operating conditions with speeds of up to 3500 rpm.
Interoil FGL 150
NSF H1 registered oil, designed to withstand high speeds avoiding premature wear on the equipment.
Antiaferrants
Assembly elements that are required to be removed continuously.
Interpasta white H1
NSF H1 registered anti-fouling paste, designed to facilitate the disassembly of metal parts and extend their useful life.
Pelletizer bearings
Mechanisms that work under conditions of high contamination by dust and residues of process material, as well as high vibrations and high loads.
Intergrease Aliplex BM
NSF H1 registered grease family, with high resistance to washing by water, vapours and contamination by dust and chemical agents. Provides wear protection and increased productivity.
Bearings in Mills and Rolling Machines
Mechanical elements subjected to high loads and vibrations.
Interplex 220 Moly
Grease designed to withstand high loads, high vibrations and with great thermal stability that does not generate runoff. Extends bearing life.